10 Speed Automatic Neutral Safety Switch Module

The 10L90 neutral safety switch and reverse light output module provides an easy 6-wire hookup. The SP-0727 interprets the gear position of the transmission via CANbus. The module then provides a ground output control for a starter relay to prevent the vehicle from starting in gear. This module is also equipped with an optional reverse light output (-) signal for a reverse light relay. This can be used to activate an aftermarket back-up camera and/or reverse lamp bulbs in your vehicle.

Provides a neutral safety module via CAN data for GM 10L80/10L90 swap harnesses. This modules also includes a reverse light output (-) (relay not provided).

The module requires:
- Can Hi
- CAN Lo
- Ignition
- Ground

The module provides:
- NSS output (-) with included relay
- Reverse Light Output (-) Relay NOT included
- Gen V Starter Connector from supplied relay
- NSS relay is provided for hook-up to your starter's solenoid position, your key switch's starter solenoid position, output from SP-0727 module, and ignition.

SP-0727.pdf

-Adobe pdf reader required-